Answers to Questions About The Easy Damaged Screen
Recently, some users inquired about the problem that the screen is easy to damage during the working process of the screening machine. We immediately visited the Xinxiang Dayong technician and gained some experience to share with you:
Let's take the rotary vibrating screen as an example to illustrate the problem of the fragility of the screen:
At present, the installation of the rotary vibrating screen screen on the market generally adopts a hollow bonding grid frame and a double-layer grid frame according to different materials and different requirements.
solution
The raw material directly hits the mesh surface, the feeding is too much, and the load of the screen is too heavy. Add a buffer or connect a feeding device to feed regularly and quantitatively.
Material dispersion is too slow, and the screen load is too heavy. Refer to the manual material running track table to adjust.
Double-layer mesh fine mesh or support mesh loose will cause friction and material in the middle. The mesh needs to be reinstalled and tensioned evenly. No bending or wrinkles are allowed.
If the support screen is damaged or the wire diameter and aperture are out of proportion to the fine screen, the support screen needs to be replaced.
The sealing ring falls off or is worn thin and needs to be adhered tightly or replaced
In daily work, there are many reasons for damaged screens in screening opportunities, such as placing tools or components directly on the screen during operation, or the tight fit between the screen and the screen frame, and the poor quality of the screen. But in short, we are in It is strongly recommended to operate the screening machine strictly in accordance with the instruction manual, so as to reduce failures, reduce costs, and improve efficiency.
+86-373-3669005
+86-373-3669006
From West Room 5, 1st Floor, Building 18, Huilong Yangguang Mingyuan, New District, Xinxiang, Henan, China (Mainland).
(Live chat)
laura@vibratingscreen.cc
Your Position: