Your Position:Home > Faq

Matters of Ultrasonic Vibrating Screen in Testing Machine

Correct and reasonable use of vibration screening equipment can not only effectively improve the screening efficiency, but also extend the service life of the equipment. The correct and reasonable use of the vibrating screening equipment includes the testing machine of the ultrasonic vibrating screen. Below, the high service screening machine will introduce the matters needing attention when testing the ultrasonic vibrating screen:

1. Check before running:
Whether the sealing rubber hose for maintaining the ultrasonic wires in the body is locked;
Whether the fixed connection port on the screen frame is locked;
(3) Check whether the power supply of the ultrasonic generator is 220V and ensure that it has ground protection.



2. Device:
⑴According to the instructions of the ultrasonic generator connection, make the power of the ultrasonic generator and the ultrasonic interface of the body connected correctly, insert the interface and lock;
⑵Turn the fine adjustment knob on the power supply of the ultrasonic generator to the minimum, and check whether there is any abnormality in the ammeter. Conventionally, the current should be less than 200mA. Turn on the power switch of the ultrasonic generator to make the material running track ideal.
⑶ Debug the ultrasonic vibrating screen;
⑷Start the ultrasonic vibration screen to make the screen reach an ideal state.
⑸ evenly feed into use.

3. Note:
220V, 50HZ power supply for ultrasonic generator power supply and ensure ground protection;
⑵Single layer mesh screening, set 1-3 layers, must be uniformly fed, according to customer requirements;
(3)Regularly check whether the sealing rubber tube for maintaining the ultrasonic conduction wire in the body is locked.